Tag Archives: response

Durable-Engraver-Cutter-PSU-CO2-Laser-Fast-Response-Speed-One-Button-Control-01-zep

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control. Good compatibility: applicable to 35-50W lasers tube. Good stability and strong adaptability. The response speed is fast and the engraving effect is good. It can prolong the service life of the laser tube. Simple control: It is very easy to start and stop by /TTL level control. Output open circuit protection. The test output laser is manually controlled by only one button. Application: engraving and cutting acrylic cloth two-color plate, rubber plate, etc. Input Voltage: AC 220V / AC 110V (Adjust with Switch) AC Frequency: 47 – 440HZ Max Input Power: 250W Max Input Current:? A Max Output Voltage: DC23kV/DC5V/DC24V Max Output Current: DC20mA/DC1A/DC24A Efficiency: = 90% (Full load) MTBF: = 10000 Hours Response speed: =1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current) Withstand Voltage: Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. Environment: Operating temperature: (-10-40)degree Celsius, Relative humidity. 140W laser engraving machine power supply. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Business, Office & Industrial\Electrical Equipment & Supplies\Power Supplies\Switching Mode Power Supplies”. The seller is “life-changing666″ and is located in this country: CN. This item can be shipped worldwide.
  • Brand: Unbranded
  • Type: 40W laser engraving machine power supply
  • AC Frequency: 47 – 440HZ

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Engraver-Cutter-PSU-Fast-Response-Speed-One-Button-Control-Simple-Control-01-iwp

Engraver Cutter PSU Fast Response Speed One Button Control Simple Control

Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Engraver Cutter PSU Fast Response Speed One Button Control Simple Control

Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Engraver Cutter PSU Fast Response Speed One Button Control Simple Control. Good compatibility: applicable to 35-50W lasers tube. Good stability and strong adaptability. The response speed is fast and the engraving effect is good. It can prolong the service life of the laser tube. Simple control: It is very easy to start and stop by /TTL level control. Output open circuit protection. The test output laser is manually controlled by only one button. Application: engraving and cutting acrylic cloth two-color plate, rubber plate, etc. Input Voltage: AC 220V / AC 110V (Adjust with Switch) AC Frequency: 47 – 440HZ Max Input Power: 250W Max Input Current:? A Max Output Voltage: DC23kV/DC5V/DC24V Max Output Current: DC20mA/DC1A/DC24A Efficiency: = 90% (Full load) MTBF: = 10000 Hours Response speed: =1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current) Withstand Voltage: Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. Environment: Operating temperature: (-10-40)degree Celsius, Relative humidity. 140W laser engraving machine power supply. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Business, Office & Industrial\Electrical Equipment & Supplies\Power Supplies\Switching Mode Power Supplies”. The seller is “loveandpeace1-0″ and is located in this country: CN. This item can be shipped worldwide.
  • Brand: Unbranded
  • Type: 40W laser engraving machine power supply
  • AC Frequency: 47 – 440HZ

Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Durable-Engraver-Cutter-PSU-CO2-Laser-Fast-Response-Speed-One-Button-Control-01-wius

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control. Good compatibility: applicable to 35-50W lasers tube. Good stability and strong adaptability. The response speed is fast and the engraving effect is good. It can prolong the service life of the laser tube. Simple control: It is very easy to start and stop by /TTL level control. Output open circuit protection. The test output laser is manually controlled by only one button. Application: engraving and cutting acrylic cloth two-color plate, rubber plate, etc. Input Voltage: AC 220V / AC 110V (Adjust with Switch) AC Frequency: 47 – 440HZ Max Input Power: 250W Max Input Current:? A Max Output Voltage: DC23kV/DC5V/DC24V Max Output Current: DC20mA/DC1A/DC24A Efficiency: = 90% (Full load) MTBF: = 10000 Hours Response speed: =1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current) Withstand Voltage: Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. Environment: Operating temperature: (-10-40)degree Celsius, Relative humidity. 140W laser engraving machine power supply. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Business, Office & Industrial\Electrical Equipment & Supplies\Power Supplies\Switching Mode Power Supplies”. The seller is “toolstopsale” and is located in this country: CN. This item can be shipped worldwide.
  • Brand: Unbranded
  • Type: 40W laser engraving machine power supply
  • AC Frequency: 47 – 440HZ

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable-Engraver-Cutter-PSU-CO2-Laser-Fast-Response-Speed-One-Button-Control-01-gepu

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control. Good compatibility: applicable to 35-50W lasers tube. Good stability and strong adaptability. The response speed is fast and the engraving effect is good. It can prolong the service life of the laser tube. Simple control: It is very easy to start and stop by /TTL level control. Output open circuit protection. The test output laser is manually controlled by only one button. Application: engraving and cutting acrylic cloth two-color plate, rubber plate, etc. Input Voltage: AC 220V / AC 110V (Adjust with Switch) AC Frequency: 47 – 440HZ Max Input Power: 250W Max Input Current:? A Max Output Voltage: DC23kV/DC5V/DC24V Max Output Current: DC20mA/DC1A/DC24A Efficiency: = 90% (Full load) MTBF: = 10000 Hours Response speed: =1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current) Withstand Voltage: Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. Environment: Operating temperature: (-10-40)degree Celsius, Relative humidity. 140W laser engraving machine power supply. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Business, Office & Industrial\Electrical Equipment & Supplies\Power Supplies\Switching Mode Power Supplies”. The seller is “shoppingfromeast” and is located in this country: CN. This item can be shipped worldwide.
  • Brand: Unbranded
  • Type: 40W laser engraving machine power supply
  • AC Frequency: 47 – 440HZ
  • Product Package ID: FR263874_01ESWS

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control