Tag Archives: button

Durable-Engraver-Cutter-PSU-CO2-Laser-Fast-Response-Speed-One-Button-Control-01-zep

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control. Good compatibility: applicable to 35-50W lasers tube. Good stability and strong adaptability. The response speed is fast and the engraving effect is good. It can prolong the service life of the laser tube. Simple control: It is very easy to start and stop by /TTL level control. Output open circuit protection. The test output laser is manually controlled by only one button. Application: engraving and cutting acrylic cloth two-color plate, rubber plate, etc. Input Voltage: AC 220V / AC 110V (Adjust with Switch) AC Frequency: 47 – 440HZ Max Input Power: 250W Max Input Current:? A Max Output Voltage: DC23kV/DC5V/DC24V Max Output Current: DC20mA/DC1A/DC24A Efficiency: = 90% (Full load) MTBF: = 10000 Hours Response speed: =1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current) Withstand Voltage: Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. Environment: Operating temperature: (-10-40)degree Celsius, Relative humidity. 140W laser engraving machine power supply. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Business, Office & Industrial\Electrical Equipment & Supplies\Power Supplies\Switching Mode Power Supplies”. The seller is “life-changing666″ and is located in this country: CN. This item can be shipped worldwide.
  • Brand: Unbranded
  • Type: 40W laser engraving machine power supply
  • AC Frequency: 47 – 440HZ

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Engraver-Cutter-PSU-Fast-Response-Speed-One-Button-Control-Simple-Control-01-iwp

Engraver Cutter PSU Fast Response Speed One Button Control Simple Control

Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Engraver Cutter PSU Fast Response Speed One Button Control Simple Control

Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Engraver Cutter PSU Fast Response Speed One Button Control Simple Control. Good compatibility: applicable to 35-50W lasers tube. Good stability and strong adaptability. The response speed is fast and the engraving effect is good. It can prolong the service life of the laser tube. Simple control: It is very easy to start and stop by /TTL level control. Output open circuit protection. The test output laser is manually controlled by only one button. Application: engraving and cutting acrylic cloth two-color plate, rubber plate, etc. Input Voltage: AC 220V / AC 110V (Adjust with Switch) AC Frequency: 47 – 440HZ Max Input Power: 250W Max Input Current:? A Max Output Voltage: DC23kV/DC5V/DC24V Max Output Current: DC20mA/DC1A/DC24A Efficiency: = 90% (Full load) MTBF: = 10000 Hours Response speed: =1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current) Withstand Voltage: Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. Environment: Operating temperature: (-10-40)degree Celsius, Relative humidity. 140W laser engraving machine power supply. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Business, Office & Industrial\Electrical Equipment & Supplies\Power Supplies\Switching Mode Power Supplies”. The seller is “loveandpeace1-0″ and is located in this country: CN. This item can be shipped worldwide.
  • Brand: Unbranded
  • Type: 40W laser engraving machine power supply
  • AC Frequency: 47 – 440HZ

Engraver Cutter PSU Fast Response Speed One Button Control Simple Control
Durable-Engraver-Cutter-PSU-CO2-Laser-Fast-Response-Speed-One-Button-Control-01-wius

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control. Good compatibility: applicable to 35-50W lasers tube. Good stability and strong adaptability. The response speed is fast and the engraving effect is good. It can prolong the service life of the laser tube. Simple control: It is very easy to start and stop by /TTL level control. Output open circuit protection. The test output laser is manually controlled by only one button. Application: engraving and cutting acrylic cloth two-color plate, rubber plate, etc. Input Voltage: AC 220V / AC 110V (Adjust with Switch) AC Frequency: 47 – 440HZ Max Input Power: 250W Max Input Current:? A Max Output Voltage: DC23kV/DC5V/DC24V Max Output Current: DC20mA/DC1A/DC24A Efficiency: = 90% (Full load) MTBF: = 10000 Hours Response speed: =1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current) Withstand Voltage: Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. Environment: Operating temperature: (-10-40)degree Celsius, Relative humidity. 140W laser engraving machine power supply. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Business, Office & Industrial\Electrical Equipment & Supplies\Power Supplies\Switching Mode Power Supplies”. The seller is “toolstopsale” and is located in this country: CN. This item can be shipped worldwide.
  • Brand: Unbranded
  • Type: 40W laser engraving machine power supply
  • AC Frequency: 47 – 440HZ

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable-Engraver-Cutter-PSU-CO2-Laser-Fast-Response-Speed-One-Button-Control-01-gepu

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control. Good compatibility: applicable to 35-50W lasers tube. Good stability and strong adaptability. The response speed is fast and the engraving effect is good. It can prolong the service life of the laser tube. Simple control: It is very easy to start and stop by /TTL level control. Output open circuit protection. The test output laser is manually controlled by only one button. Application: engraving and cutting acrylic cloth two-color plate, rubber plate, etc. Input Voltage: AC 220V / AC 110V (Adjust with Switch) AC Frequency: 47 – 440HZ Max Input Power: 250W Max Input Current:? A Max Output Voltage: DC23kV/DC5V/DC24V Max Output Current: DC20mA/DC1A/DC24A Efficiency: = 90% (Full load) MTBF: = 10000 Hours Response speed: =1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current) Withstand Voltage: Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. Environment: Operating temperature: (-10-40)degree Celsius, Relative humidity. 140W laser engraving machine power supply. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Business, Office & Industrial\Electrical Equipment & Supplies\Power Supplies\Switching Mode Power Supplies”. The seller is “shoppingfromeast” and is located in this country: CN. This item can be shipped worldwide.
  • Brand: Unbranded
  • Type: 40W laser engraving machine power supply
  • AC Frequency: 47 – 440HZ
  • Product Package ID: FR263874_01ESWS

Durable Engraver Cutter PSU CO2 Laser Fast Response Speed One Button Control
Cutting-Acrylic-Cloth-Plate-Engraver-Cutter-PSU-CO2-Laser-One-Button-Control-01-hhee

Cutting Acrylic Cloth Plate Engraver Cutter PSU CO2 Laser One Button Control

Cutting Acrylic Cloth Plate Engraver Cutter PSU CO2 Laser One Button Control
Cutting Acrylic Cloth Plate Engraver Cutter PSU CO2 Laser One Button Control
Cutting Acrylic Cloth Plate Engraver Cutter PSU CO2 Laser One Button Control
Cutting Acrylic Cloth Plate Engraver Cutter PSU CO2 Laser One Button Control
Cutting Acrylic Cloth Plate Engraver Cutter PSU CO2 Laser One Button Control
Cutting Acrylic Cloth Plate Engraver Cutter PSU CO2 Laser One Button Control
Cutting Acrylic Cloth Plate Engraver Cutter PSU CO2 Laser One Button Control

Cutting Acrylic Cloth Plate Engraver Cutter PSU CO2 Laser One Button Control
Cutting Acrylic Cloth Plate Engraver Cutter PSU CO2 Laser One Button Control. Good compatibility: applicable to 35-50W lasers tube. Good stability and strong adaptability. The response speed is fast and the engraving effect is good. It can prolong the service life of the laser tube. Simple control: It is very easy to start and stop by /TTL level control. Output open circuit protection. The test output laser is manually controlled by only one button. Application: engraving and cutting acrylic cloth two-color plate, rubber plate, etc. Input Voltage: AC 220V / AC 110V (Adjust with Switch) AC Frequency: 47 – 440HZ Max Input Power: 250W Max Input Current:? A Max Output Voltage: DC23kV/DC5V/DC24V Max Output Current: DC20mA/DC1A/DC24A Efficiency: = 90% (Full load) MTBF: = 10000 Hours Response speed: =1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current) Withstand Voltage: Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. Environment: Operating temperature: (-10-40)degree Celsius, Relative humidity. 140W laser engraving machine power supply. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Business, Office & Industrial\Electrical Equipment & Supplies\Power Supplies\Switching Mode Power Supplies”. The seller is “kuisuoeu” and is located in this country: CN. This item can be shipped worldwide.
  • Brand: Unbranded
  • Type: 40W laser engraving machine power supply
  • AC Frequency: 47 – 440HZ
  • Product Package ID: FR266003_01QVLB

Cutting Acrylic Cloth Plate Engraver Cutter PSU CO2 Laser One Button Control
Durable-Engraver-Cutter-PSU-CO2-Laser-One-Button-Control-Simple-Control-01-qckp

Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control

Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control
Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control
Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control
Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control
Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control
Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control
Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control

Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control
Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control. Good compatibility: applicable to 35-50W lasers tube. Good stability and strong adaptability. The response speed is fast and the engraving effect is good. It can prolong the service life of the laser tube. Simple control: It is very easy to start and stop by /TTL level control. Output open circuit protection. The test output laser is manually controlled by only one button. Application: engraving and cutting acrylic cloth two-color plate, rubber plate, etc. Input Voltage: AC 220V / AC 110V (Adjust with Switch) AC Frequency: 47 – 440HZ Max Input Power: 250W Max Input Current:? A Max Output Voltage: DC23kV/DC5V/DC24V Max Output Current: DC20mA/DC1A/DC24A Efficiency: = 90% (Full load) MTBF: = 10000 Hours Response speed: =1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current) Withstand Voltage: Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. Environment: Operating temperature: (-10-40)degree Celsius, Relative humidity. 140W laser engraving machine power supply. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Business, Office & Industrial\Electrical Equipment & Supplies\Power Supplies\Switching Mode Power Supplies”. The seller is “milingking55″ and is located in this country: CN. This item can be shipped worldwide.
  • Brand: Unbranded
  • Type: 40W laser engraving machine power supply
  • AC Frequency: 47 – 440HZ

Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control
Antec-NX410-Gaming-Case-ATX-LED-Control-Button-Mesh-Front-Black-01-dr

Antec NX410 Gaming Case, ATX, LED Control Button, Mesh Front, Black

Antec NX410 Gaming Case, ATX, LED Control Button, Mesh Front, Black
Antec NX410 Gaming Case, ATX, LED Control Button, Mesh Front, Black
Antec NX410 Gaming Case, ATX, LED Control Button, Mesh Front, Black
Antec NX410 Gaming Case, ATX, LED Control Button, Mesh Front, Black
Antec NX410 Gaming Case, ATX, LED Control Button, Mesh Front, Black
Antec NX410 Gaming Case, ATX, LED Control Button, Mesh Front, Black

Antec NX410 Gaming Case, ATX, LED Control Button, Mesh Front, Black
The NX410 Black mid-tower gaming case effortlessly combines a bevy of in-demand features: USB 3.0 connectivity, ample storage drive bays, room for expansion, and includes one ARGB LED fans in both front and rear. With support for up to a 360 mm liquid cooling radiator in front and 280 mm on top, NX410 Black is easy to build with and easy to cool. Just a single press to change the front panel’s ARGB lighting effect at will. Supports Up-to 6 Fans. Cooling has never been easier. With support for up-to six cooling fans at both 120mm and 140mm in diameter and radiator support up-to 360mm at the front and 280mm at the top. Small Form Factor: No. Power Supply Wattage: No PSU. Motherboard Support: “ATX, Micro ATX, Mini ITX”. Window(s): Yes (Window). LED Lighting: Yes (LED Lighting). Connectors / Controls: 1 x USB 3.0 2 x USB 2.0 HD Audio Power LED Control Button. Drive Bays: 2/1 x 3.5/2.5 (convertible) 3 x 2.5. Expansion Slots: 7 Expansion Slots. Cooling System: Included Front: 2 x 140 mm ARGB fans Rear: 1 x 120 mm ARGB fan Fan Mounts Front: 3 x 120 / 140 mm Top: 2 x 120 / 140 mm Rear: 1 x 120 mm. Water Cooling options: Front: 120 / 240 / 280 / 360 mm radiator Top: 120 / 240 / 280 mm radiator Rear: 120 mm radiator. Material: SPCC / ABS Tempered glass side window. Compatability: Max GFX Card length: 335mm Max CPU Cooler height: 168mm PSU: 165mm. Weight/Dimensions: 5.1 kg (DxWxH) 390 x 210 x 485 mm. Package Weight: 6.3000 kg. This item is in the category “Computers/Tablets & Networking\Computer Components & Parts\Computer Cases & Accessories\Computer Cases”. The seller is “realtimecomp” and is located in this country: GB. This item can be shipped to United Kingdom, Antigua and Barbuda, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French Guiana, Iceland, Jersey, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, South Africa, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Dominican Republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El Salvador, Trinidad and Tobago, Vietnam.
  • Brand: ANTEC
  • Type: Cases
  • MPN: 0-761345-81041-8
  • Case Type: Gaming Case
  • Form Factor: ATX
  • Number of 5.25 in Drive Bays: 0
  • Number of 3.5 in Drive Bays: 2
  • Product Line: Antec NX410
  • Colour: Black
  • PSU Included: No PSU
  • Features: USB 3.0, USB 2.0, HD Audio, Power, LED Control Button
  • Model: 0-761345-81041-8
  • Case Material: SPCC / ABS, Tempered glass
  • Manufacturer Warranty: 1 Year
  • Unit Quantity: 1
  • Unit Type: 1
  • EAN: 761345810418

Antec NX410 Gaming Case, ATX, LED Control Button, Mesh Front, Black
Durable-Engraver-Cutter-PSU-CO2-Laser-One-Button-Control-Simple-Control-01-wv

Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control

Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control
Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control
Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control
Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control
Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control
Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control
Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control

Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control
Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control. Good compatibility: applicable to 35-50W lasers tube. Good stability and strong adaptability. The response speed is fast and the engraving effect is good. It can prolong the service life of the laser tube. Simple control: It is very easy to start and stop by /TTL level control. Output open circuit protection. The test output laser is manually controlled by only one button. Application: engraving and cutting acrylic cloth two-color plate, rubber plate, etc. Input Voltage: AC 220V / AC 110V (Adjust with Switch) AC Frequency: 47 – 440HZ Max Input Power: 250W Max Input Current:? A Max Output Voltage: DC23kV/DC5V/DC24V Max Output Current: DC20mA/DC1A/DC24A Efficiency: = 90% (Full load) MTBF: = 10000 Hours Response speed: =1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current) Withstand Voltage: Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. Environment: Operating temperature: (-10-40)degree Celsius, Relative humidity. 140W laser engraving machine power supply. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Business, Office & Industrial\Electrical Equipment & Supplies\Power Supplies\Switching Mode Power Supplies”. The seller is “toolstopsale” and is located in this country: CN. This item can be shipped worldwide.
  • Brand: Unbranded
  • Type: 40W laser engraving machine power supply
  • AC Frequency: 47 – 440HZ

Durable Engraver Cutter PSU CO2 Laser One Button Control Simple Control